- Fri Sep 25, 2020 3:32 pm
#73067
SOPERSONIC
I though I would post this on here, so that I don't have to keep going back through emails everytime someone needs the info 
Engineer code is 66 and to change the temp differential which is set as standard at 1 degree, you need to adjust settings R04 and R12 to whatever Hysteresis you want - mine is set to 0.3. Setting R10 is the lowest temperature it will allow the heating to be set at - standard is set at 15 degrees, I changed mine to 8 degrees.
Page1.png (170.6 KiB) Viewed 2704 times
Page2.png (178.47 KiB) Viewed 2704 times
Page3.png (168.85 KiB) Viewed 2704 times
Page4.png (96.01 KiB) Viewed 2704 times
Engineer code is 66 and to change the temp differential which is set as standard at 1 degree, you need to adjust settings R04 and R12 to whatever Hysteresis you want - mine is set to 0.3. Setting R10 is the lowest temperature it will allow the heating to be set at - standard is set at 15 degrees, I changed mine to 8 degrees.
SOPERSONIC
I wonder why they haven't listed the 9kW in those tables, hopefully the 9kW is a new model and the tables will match and the guts/wiring is the same 